FISCHER 63298, Руководство пользователя и инструкции по безопасности

Страница: 3 / 16

Page 3 For technical questions, please call 1-888-866-5797. Item 63298
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
assembly instructions
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Place the Base (2) flat on a horizontal surface.
Place the Upper Lift Arm Assembly onto the end of the Base
as shown and align the bolt holes.
Secure the Upper Lift Arm Assembly to the Base using two Bolts (6),
Flat Washers (8), Lock Washers (9), and Nuts (10).
bolt (6)
nut (10)
lock lock
Washer Washer
(9) (9)
Flat Flat
Washer Washer
(8) (8)
Upper Upper
lift arm lift arm
assembly assembly
base base
(2) (2)
Step 1: attach Upper lift arm assembly to base
2. Place the two Support Bars (11) as shown and align with the bolt holes in
the Base. Note that flat sides of Bars must align against Base as shown.
Attach the Support Bars to the Base using one Bolt (7),
Flat Washer (8), Lock Washer (9), and Nut (10) per bar.
Finger tighten the hardware.
bolt (7)
nut (10)
lock lock
Washer (9) Washer (9)
Flat Flat
Washer Washer
(8) (8)
Support Support
bar bar
(11) (11)
base base
(2) (2)
Step 2: attach Support bars to base