Fischer Panda 5000i PVK-U, Руководство пользователя

Страница: 131 / 174

General operation
30.10.12 Chapter 10: General operation - Page 131
10. General operation
10.1 The Panda iControl2 panel
The "Panda iControl2 panel" control panel is the control and display unit for the Panda iControl2 control system and
represents the interface between the user and the Panda iControl2 controller. The integrated display serves to
present the most important data of the system as well as warnings and error messages.
The control panel is equipped with four buttons for operating the Panda iControl2 controller:
Fig. 10.1-1: Panda iControl 2 panel
10.1.1 Switching the controller on and off
The Panda iControl2 controller is switched on and off with the On/Off button on the Panda iControl2
panel. Press and hold the On/Off button until the start screen with the panda bear appears on the display.
The controller is switched off by actuating the On/Off button once more.
Fig. 10.1.1-1: .Panda iControl2 start screen
On the start screen, the hardware version, the generator type,
and the software version are shown at the bottom left.
1. On/Off button: Switching the Panda iControl2 controller on and off
2. Start/Stop button: Starting and stopping the generator, confirming values in selection menus (Enter key)
3. Cursor-up button Switching between display screens (up), counting values up in selection menus
4. Cursor-down button Switching between display screens (down), counting values down in selection menus.