Fischer Panda 5000i PVK-U, Руководство пользователя

Страница: 129 / 174

Safety instructions for the Panda iControl2
30.10.12 Panel Generator Control P6+ RE0703_Kunde.R06 - Chapter 9: Safety instructions for the Panda iControl2 Page 129
9. Safety instructions for the Panda iControl2
9.1 Personnel
The settings described here can be performed by the operator unless highlighted differently.
The installation should be implemented by specially trained technical personnel or by authorised workshops (Fischer
Panda Service Points), only.
9.2 Safety instructions
NOTE:
Ensure compliance with the safety instructions in the Fischer
Panda genset manual.
If these instructions are not on hand, they can be requested
from Fischer Panda GmbH, 33104 Paderborn, Germany.
WARNING: Automatic start-up
An external signal may trigger an automatic start-up.
WARNING:
The generator must not be operated with the cover removed.
If the generator is being installed without a sound insulation
capsule, it must be ensured that all rotating parts (belt pulley,
belts etc.) are covered and protected so that there is no dan-
ger to life and body!
If a sound insulation capsule will be produced at the place of
installation, then well-placed signs must show that the gener-
ator can only be switched on with the capsule closed.
All service, maintenance, or repair work may only be carried
out when the unit is not running.
WARNING: Electric voltage
Electric voltage - DANGER TO LIFE!
Electric voltages of more than 48V are potentially lethal in
any situation. The rules of the respective regional authority
must be adhered to for installation and maintenance.
For safety reasons, only an electrician may carry out the
installation of the electrical connections of the generator.