Fischer Panda 15 mini PMS Digital, Руководство пользователя

Страница: 144 / 162

Generator control system
Based on VCS183
DS_VCS183 Page 23
Rev. 06 www.fischerpanda.com ©Fischer Panda generators Inc.
Table 9: Operational modes
Mode Remarks
Initialization mode Initializing system, loading data from EEPROM, calibrating actuator
Invalid program data Program data is not plausible. Requires re-programming, VCS will not leave
this status without user interaction. This mode will never show up in the field.
Stop mode Generator is in regular stop mode. Alarms might be pending
Initiate engine stop Control system did initiate stop procedure
Stopping generator Procedure to stop engine is ongoing
Prep. For self-test Testing purpose only, will never enter this mode in regular applications
Self-testing Testing purpose only, will never enter this mode in regular applications
Unacknowledged
alarms pending Control system performed an emergency shut-down for one or more specific
alarm reasons and the user did not acknowledge
Cannot stop engine Generator is not stopping as triggered by the stop solenoid. Stop solenoid may
be miss-aligned
Requires power cycle Testing purpose only, will never enter this mode in regular applications
Preparing for manual
operation Testing purpose only, will never enter this mode in regular applications
Manual operation Testing purpose only, will never enter this mode in regular applications
Exit man. Operation Testing purpose only, will never enter this mode in regular applications
Preparing for start Control system is preparing for engine start (preheating, priming fuel system)
Cranking Cranking engine
Idling Generator is idling
Nominal speed Generator is transitioning to nominal speed
Running Generator is in regular operating mode
Warming up Generator is warming up
Cool down Generator is cooling down
Waiting for AC-
voltage Generator start was detected based on oil pressure sensing. Waiting for AC
voltage to build up.