Fischer Panda 15 mini PMS Digital, Руководство пользователя

Страница: 125 / 162

Generator control system
Based on VCS183
DS_VCS183 Page 4
Rev. 06 www.fischerpanda.com ©Fischer Panda generators Inc.
Control panel GP178
This device serves as a user interface to the entire control
system. Up to 8 control panels may be connected to the system
to allow access / operation of the system from different
locations. Furthermore, the control panel allows remote control
of the generator either via dedicated I/O lines for start/stop
and status feedback or via NMEA2000 network. Connection
details for NMEA2000 network are not part of this document.
Connection block KL196
This component joins the sensors and actors placed on the
generator to the control systems components. It also is the
distribution point of DC (battery) power to the various consumers
inside and outside the generator capsule. It is thus also the point
that provides circuit protection (fuses).
Connection harness
This is the harness installed on the generator, joining signals from/to sensors/actors, providing data link
between above mentioned components and connecting the alternator output to the power output
connection point.
All electrical connections between system components is by means of secured plugs, securing
mechanism is either retaining nuts/bolts or plastic latches. Connector types are chosen in a way that
makes miss-plugging impossible. Number of pins, pin spacing, pin arrangement or other interlocking
mechanism will allow just one way of interconnecting components. Wherever similar signals are used on
different plugs such unambiguous matching may not be ensured. In these cases, it is however safe to
plug in connectors in random order without compromising system functionality.
Figure 4 GP178
Figure 5 KL196