26
CoaXPress
®
interface
Refer to section 8 for a complete description of the CoaXPress
®
interface.
Ethernet interface
The RJ45 ethernet link is used for specific maintenance operations such as camera firmware upgrade,
log collection, etc. It is not needed for standard camera operation.
The IP configuration is performed using custom registers.
The IP configuration of the camera can be done statically or dynamically, using DHCP.
When using DHCP, in the absence of answer from a DHCP server, the camera will use link local fallback
address 169.254.123.123, netmask 255.255.0.0.
For the firmware update procedure, please contact First Light at
Ethernet cable connected to the Ethernet port.
I/O port
Electronic sensitive interface
Please use appropriate grounding methods
Please use a shielded cable
Содержание C-BLUE One
