background image

6  

 

Safety

 

Proper Usage 

• Do not use any equipment in any way other than designed or intended by the                

manufacturer.  It is imperative that FIRST DEGREE FITNESS equipment is used          

properly to avoid injury. 

• Injuries may result if exercising improperly or excessively.  It is recommended that all       

individuals consult a physician prior to commencing an exercise program.  If at any time   

during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and consult   

your physician. 

• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts      

to avoid injury. 

• Follow instructions provided in this manual for correct foot position and basic rowing   

techniques. 

• For more detailed rowing techniques, please refer to our International website 

www.firstdegreefitness.com 

Inspection 

• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken 

parts. For all FIRST DEGREE FITNESS equipment use only replacement parts supplied 

by FIRST DEGREE FITNESS. 

• EQUIPMENT MAINTENANCE 

- Preventative maintenance is the key to smooth operating 

equipment as well as to keep your liability to a minimum. Equipment needs to be              

inspected at regular intervals. 

• Ensure that any person(s) making adjustments or performing maintenance or repair of    

any kind is qualified to do so. 

• DO NOT ATTEMPT TO USE OR REPAIR ANY ACCESSORY APPROVED FOR USE WITH 

THE FIRST DEGREE FITNESS EQUIPMENT WHICH APPEARS TO BE DAMAGED OR 

WORN. 

• Check regularly and follow all instructions for maintenance as specified in this manual.

 

• Replace immediately any defective parts and do not operate unit until all repairs are     

complete. 

Operating Warnings 

•  Keep  children  away  from  the  equipment.  Parents  or  others  supervising  children  must     

provide close supervision of children if the equipment is used in the presence of children. 

• Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is    

also  recommended  to  have  users  secure  long  hair  back  and  up  to  avoid  contact  with      

moving parts. 

• All bystanders must stay clear of all users, moving parts and attached accessories and 

components while machine is in operation. 

•        

WARNING Do not insert fingers into Tank! 

 

Содержание E720A





















Отзывы: