Page 12
Installing cameras
connecting devices
Splitter -
8 camera/
1 Power
Video to DVR
Channels 1-8
Video to Camera
Power to Camera
Power to DVR
Power to Cameras
Power
from 120V
DC Converter - 12V
AV Cable: BNC/
DC Power
(1 per Camera)
VGA to PC Monitor or TV
BNC to Security Camera Monitor
(Not included)
RJ45 Ethernet
to Router and
Internet
PTZ & Alarm
Connections
(Cameras not
included)
Follow this diagram to make device connections. Note, some devices are
not included with this kit. See “What’s in the Box” for included devices.
DVR Front Face
Connect Mouse &
USB Drive
product overview
cAMERA AND pOWER cONNECTIONS
RCA Audio In from Audio
Cameras or Powered
Microphone
(Not included)
RCA Audio Out to
Powered Speakers
(Not included)
Smartphone
through Mobile
Internet Setup
(Smartphone Not
included)
Mounting Cameras and Running Cable
Select the position for the camera and secure the camera stand. Screw the
camera onto the stand. Adjust camera to the proper view angle. Make sure
the lens is upright relative to the subject. Tighten the thumb bolt. First Alert
cameras can be either ceiling or wall mounted by simply reversing the camera
stand mounting. See “Camera Orientation” Info box. Holes are provided on
both the bottom and back of the camera housing
to accommodate most mounting requirements.
Attach proper length of cable and run from
camera to DVR location. Note: Power cable ends
are different. Be sure the correct power connector
end matches “To Camera” or “To DVR”. Tip -
Connect cable at camera end before running
cable to verify orientation is correct. Also, see
Information box on “Longer Cable Runs”.
Camera Orientation
It’s important the camera is
mounted correctly to ensure the
image is not upside down as the
camera lens can only be posi-
tioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to RG59 Coax cable. First Alert kits ship
with economical AV cable that is designed to work well up to the length of cable
provided, usually around 60 feet. If longer distances between camera and DVR are
required, you will need to upgrade to RG59 Coax cable. We provide several lengths
up to 300 feet. In addition, if you need to run cable for in-wall installations, then you
may require fire rated cable, FT-4/CMR UL approved for in-wall installations.
Camera - Wall Mounted
Camera - Ceiling Mounted
To DVR
To Camera
Verify Cable Orientation
