Connection to Vehicle
It is strongly recommended that the unit is connected to the vehicle
through a
fused supply
using the supplied cable.
When using the supplied cable the positive connection is made to the
core white wire. The negative (ground) connection is made to the
outer core (screening). It is not possible to damage the unit through
connecting the cable the wrong way around however the unit will
only work when connected correctly.
Specification
Supply Voltage
11-15VDC
Power Connector
2.1mm (5.5mmOD) +VE centre pin
GPS Chipset
SiRF Star III
Accuracy Max
0.1ms
-1
Antenna
1575.42MHz Chip (L1C)
We hope you enjoy using this product as much as we enjoyed developing it!
Developed and Manufactured by
Advent Controls Ltd, Liverpool, UK
Made in UK
RETRO GPS<…
.…
…
speedometer
ELB 1985
2-Digit GPS Speedometer
with Speed Warning Alarm
www.firmtec.co.uk
