Firetrol Emerson Mark IIXG, Инструкция по установке и эксплуатации

Страница: 24 / 27

1
REMOVE DRIVE
Use arrows to enable or disable the Remove Drive feature. Press to con fi rm.
Much like a computer, the Remove Drive feature ensures fi le closure prior to removing the USB fl ash drive from the
Mark II
XG
. Use of this feature helps prevent fi le corruption.
NOTE: The Mark IIXG also features an automatic daily save function. Every day at midnight (0:00) the events for that
day are written to a
fi le on the USB fl ash drive. This fi le is also a text fi le (.txt) and is named for the month, in the current
year folder under Firetrol (x:\Firetrol\2009\Sept.txt).
19
MOTORSCOPE
MOTORSCOPE
Information is displayed for the following:
Startup Time
Sampling Rate
Voltage Min.
Current Max.
VOLTAGE GRAPH
A graphical display of the controller voltage is shown representing the fi rst 10 seconds of the last motor start.
CURRENT GRAPH
A graphical display of the motor current is shown representing the fi rst 10 seconds of the last motor start.
FACTORY
CONFIGURATION
MODEL
3
SERIAL NUMBER
Use arrows to enter the controller serial number. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
MODEL
Use arrows to select required model number. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
HP (HORSEPOWER)
Use arrows to select required motor horsepower. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
VOLTAGE
Use arrows to select required voltage. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
FULL LOAD
Use arrows to set the full load amps (FLA) of the motor. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
CT RATIO
Use arrows to set required CT ratio for the controller. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
Configuration - Model
3
FREQUENCY
Use arrows to select required frequency (hertz) for the supplied power. Press to con fi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
1
Use to select required phase sequence (1~, abc, cba). Press to con fi rm.
PHASE SEQUENCE