CELL-MOD Series
Product Installation Document
PN LS10182-000GE-E:C 3/20/2018 18-114
1 Description
The CELL-MOD houses a GSM (cellular) communicator card for central station reporting. The CELL-MOD is a red plastic enclosure. The CELL-
MOD is compatible with the ES-50X Series, ES-200X Series, NFW-50X Series, NFW-100X Series, IFP-75, IFP-300/ECS, IFP-2100/ECS, 6820/
EVS, 6808, 6700, and GWF-7075 Fire Alarm Control Panels.
2 Installation
1.
Remove the red plastic cover of the assembly.
2.
Loosen, but not remove, the screw centered in the blue tab to remove the gray mounting plate. Place the PCB assembly in a safe location until
the backbox installation is complete.
3.
Mark and pre-drill holes in the wall for the
right-side
keyhole mounting. Install fasteners in the wall with the screw heads protruding. Place
backbox over the screws, level, and secure. Mark and drill the
left-side
mounting holes and secure.
NOTE:
Please contact your AlarmNet® distributor prior to programming this device to ensure the SIM card is activated.
If the module has been deactivated, follow these steps to reactivate:
1. Visit www.alarmnet360.com.
2. Login with a valid ID and password. If these credentials are not available, contact AlarmNet technical support.
3. Go to Tools > Cellular Activation.
4. Enter the 12-digit Activation ID (AID) found on the label on the GSM card.
5. Click “Activate”.
!
WARNING: THIS SYSTEM CONTAINS STATIC SENSITIVE COMPONENTS
WEAR A PROPER GROUNDING WRIST STRAP AND WORK ON A STATIC-SAFE WORKSPACE TO PROTECT
ELECTRONIC ASSEMBLIES.
NOTE:
The CELL-MOD mounts in a “landscape” orientation. Ensure keyhole mounting is on the right.
loosen screw
remove mounting
plate
blue tab
drill holes, level, and
secure backbox
