The ES18B is also identified as FK1 and is referred to FK1 in this document.
7
STEP 3:
Press the
▲
or
▼
to adjust the Time Delay
value (0-99 minutes). Press “Menu/OK.”
STEP 4:
The system will now display the Time Window.
This is the preset length of time allowed to enter a valid
code after Time Delay has expired. Press the
▲
or
▼
to
select the time window value
（
0-15 minutes
）
desired.
STEP 5:
Press “Menu/OK.”
2.13
Pair locks
After a new lock or keypad is connected, the “Pair Locks”
operation must be completed to link them together.
STEP 1:
Enter a valid code
STEP 2:
Scroll
▲
or
▼
to the menu selection “Pair
Locks.”
STEP 3:
LCD display “Pair Locks?”
STEP 4:
Press “Menu/OK.” LCD display:
Pair lock is success.
Note:
1.
When installing a new keypad on an existing lock, use
a default manager code (unless the keypad had a new
code programmed) to conduct the “Pair Lock” operation.
Once the keypad and lock are paired, the codes are reverted
to the codes that existed on the lock before the keypad
was replaced.
2.
When installing a new lock on an existing keypad, use an
existing manager code that was used on the safe to conduct
the “Pair Lock” operation. Once the keypad and lock are
paired, the codes are reverted to the saved codes in the lock.
