The ES18B is also identified as FK1 and is referred to FK1 in this document.
6
2.9
Enable/Disable Dual Mode
STEP 1:
Enter a valid code.
STEP 2:
Scroll
▲
or
▼
to the menu selection “Enable Dual
Mode” or “Disable Dual Mode” and Press “Menu/OK.”
Dual Mode has now been enabled. Two valid codes will
be required to open the safe lock system. Open lock by two
Users within 60 seconds.
Note: Enable/Disable Dual Mode - When Enable Mode is
enabled this Menu Selection will change to “Disable Dual
Mode.” Therefore, to Disable mode, follow the same process
but select “Disable Dual Mode.”
2.10
Delete All General Users
This feature is used to delete all general users from the
system. Upton executing this command, all general users
(Users 03-32) will be deleted.
STEP 1:
Enter a valid code.
STEP 2:
Scroll
▲
or
▼
to the menu selection “Delete All
Users” and Press “Menu/OK.”
STEP 3:
The system will request a confirmation.
Press “Menu/OK.”
The system will verify that all General User Code have
been deleted.
2.11
Show/Hide Code
This feature would be used in order to hide the code as it is
entered on the LCD screen.
In normal operation, as the user enters the code, the digit of
the code pressed is visible on the LCD until the next digit is
entered. The subsequent digit turns to an “*”.
With the Hide Code Entry feature, every digit that is entered
is displayed as an “*” immediately upon entry, so that your
code is always obscured from view on the LCD.
To hide Code Entry, follow this procedure:
STEP 1:
Enter a valid code
STEP 2:
Scroll
▲
or
▼
to the menu selection “Hide Code”
and Press “Menu/OK.”
All digit entries will now be display as “*” immediately
upon entry.
To revert from this mode, follow the same process but
select “Show Code.”
2.12
Set/Cancel Time Delay
Time Delay is a feature used to deter burglary, provided a
prospective burglar has knowledge that a Time Delay safe is
in use, the likelihood of burglary is greatly reduced.
Time Delay is a feature that requires the User to enter his/
her code, wait a prescribed period of time, and then re-enter
a valid code to unlock the safe lock.
STEP 1:
Enter a valid code
STEP 2:
Scroll
▲
or
▼
to the menu selection “Set/Cancel
Time Delay” and Press “Menu/OK.”
