Fired Up Corporation Adam, Инструкция по использованию и уходу

Страница: 5 / 16

0 5
SECTION 01
• Never cut off the plug and hard wire into a fixed fused
spur
• Never use with a timer or any other device that
switches the fire on automatically.
PLEASE DO NOT OBSTRUCT THE AIR VENTS OF THE HEATER
UNIT
This appliance has a ‘self resetting’ safety cut out
system. To prevent overheating, ensure the air inlets and
outlets are not obstructed. If the safety cut-out operates,
switch off the heater and allow to fully cool down.
Remove any obstruction before re-use.
IMPORTANT ELECTRICAL SAFETY
The plug must always be accessible, after installation, in
order to disconnect the heater from the electrical supply
for maintenance cleaning or isolation in an emergency.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
This heater must be earthed. The supply cord must be
safely routed from the heater to an electrical socket.
Any new wiring required, must be In accordance with
local and national codes and other applicable
regulations in order to reduce the risk of fire, electric
shock, or other injuries. Always use a certified electrician
should new circuits or outlets be required.