background image

1 1

SECTION 03

USE

To prepare the electric suite, randomly place the pebbles in the correct positions:

•  In the bowl for pebble bowl suites

•  On the bed for pebble bed suites

The appliance is controlled using 3 switches. A switch is in the ON position when the 

side with marking on (i.e. I or II) is ‘pressed in’. Use the following sequence to operate. 

The grey represents a ‘pressed swtich’.

NOTE: The heater is located, as shown 

on the example on the right, on all 

Contemporary Suites

CARE

•  Brushed stainless steel fires can be cleaned using a cloth and propriety cleaner.   

•  Other features (non-silver) can be cleaned using a damp cloth.

•  If the supply cord is damaged, it must be replaced by a suitably qualified person.

•  The area around the suite should be kept free from animal hair, lint and other

    extraneous material that may be drawn into the workings of the appliance

    which could affect its performance.

•  Before installing this product please take note that should removal or relocation of    

    the product be necessary, any installation methods used may be left exposed.

On/Off with 

effect only

1kW heat 

setting

2kW heat 

setting

 

 

 

 

    

        

        

 

     

 

Содержание Adam

















Отзывы: