
Supported RADIUS Attribute/
Value Pairs for L2TP operation
87
F.6. Disconnect
A disconnect message is accepted as per RFC5176, if the session can be disconnected, and ACK is sent, else
a NAK
Table F.7. Disconnect
AVP
No. Usage
Acct-Session-Id
44 Unique ID for session
Chargeable-User-
Identity
89 This is used as CQM graph name.
Acct-Terminate-
Cause
49 Cause code as appropriate to be used in accounting stop message
The session is identified by Acct-Session-Id if present, else by Chargeable-User-Identity. No other
identification parameters are supported. If sent then they are ignored.
F.7. Change of Authorisation
A change of authorisation message is accepted as per RFC5176
Table F.8. Change-of-Authorisation
AVP
No. Usage
Acct-Session-Id
44 Unique ID for session
Chargeable-User-
Identity
89 This is used as CQM graph name.
Framed-Route
22 May appear more than once. Text format is IPv4-Address/Bits 0.0.0.0 metric.
The target IP is ignored but must be valid IPv4 syntax. The metric is used as
localpref in routing.
Delegated-IPv6-
Prefix
123 IPv6 prefix to be routed to line. Maximum localpref used.
Framed-IPv6-Prefix
97 IPv6 prefix to be routed to line. Maximum locapref used.
Framed-IPv6-Route
99 May appear more than once. Text format is IPv6-Address/Bits :: metric. The
target IP is ignored but must be valid IPv6 syntax. The metric is used as
localpref in routing. Alternative format IPv6/Bits IPv4-Address metric defines
that prefix is to be protocol 41 IPv4 tunneled to specified target via this link.
Session-Timeout
27 Absolute limit on session, in seconds
Terminate-Action
29 If not specified, or 0, then terminate on Session-Timeout or Quota reached,
else send RADIUS Interim accounting update (not an Access Request)
Connect-Info
77 Text tx speed limit to apply to session
Filter-Id
11 See filter ID section
The session is identified by Acct-Session-Id if present, else by Chargeable-User-Identity. No other
identification parameters are supported. If sent then they are ignored.
Parameters are left unchanged if not specified.
• If any route entries (IPv4 or IPv6) are present then the existing routing (apart from the PPP endpoint address)
are all removed and replaced with what has been sent. To clear all routes send a framed route with a blank
string. The Framed-IP-Addreess cannot be changed.
Содержание FB6602
Страница 1: ...FireBrick FB6602 User Manual FB6000 Versatile Network Appliance...
Страница 2: ......
Страница 60: ...Profiles 45 profile name Off set false profile name On set true...