
111
Appendix D. FireBrick specific SNMP
objects
This appendix details the SNMP objects that are specific to the FireBrick.
D.1. Monitoring information
General monitoring information.
Table D.1. iso.3.6.1.4.1.24693.1
...OID Type
Meaning
1.1
Integer (mV)
Voltage: "A" power supply. Should be around 12V. May show a few volts when no
power connected
1.2
Integer (mV)
Voltage: "B" power supply. Should be around 12V. May show a few volts when no
power connected
1.3
Integer (mV)
Voltage: Combined 12V supply. Will be slightly lower than highest of "A" and "B"
due to diode drop
1.4
Integer (mV)
Voltage: 3.3V reference
1.5
Integer (mV)
Voltage: 1.8V reference
1.6
Integer (mV)
Voltage: 1.2V reference
1.7
Integer (mV)
Voltage: 1.1V reference
1.8
Integer (mV)
Voltage: 3.3V fan power, if present
1.9
Integer (mV)
Voltage: 1.2V fan power, if present
2.1
Integer (mC)
Temperature: Fan controller
2.2
Integer (mC)
Temperature: CPU
2.3
Integer (mC)
Temperature: RTC
3.1
Integer (rpm)
Speed: Fan 1
3.2
Integer (rpm)
Speed: Fan 2
D.2. BGP information
Information about specific BGP peers.
Note
The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 6 followed by
32 entries each 0 to 15 for each hex character in the IPv6 address. The IP is the IP of the BGP peer
you wish to check. You cannot walk all peers, but can check specific peers by IP address.
Table D.2. iso.3.6.1.4.1.24693.179
...OID Type
Meaning
IP.1
String
Name of BGP peer from config
IP.2
Integer
State of BGP peer (0=idle, 1=active, 2=openwait, 3=opensent, 4=openconfig,
5=established, 6=closed, 7=free)
IP.3
Integer
Remote AS
Содержание FB6402
Страница 1: ...FireBrick FB6402 User Manual FB6000 Versatile Network Appliance...
Страница 2: ......