15
Updating your Firebelly Device
From time to time updates to your Firebelly device firmware may be made available in order to
fix issues or provide feature enhancements or new features. We recommend that you either
charge your device fully or plug in the charger to make sure your device has enough power for
the entire software update.
To update your Firebelly device using the Firebelly App:
1. Have your device turned on (flashing green), charged, and near your phone or tablet
2. Open the Firebelly App and navigate to the Manage Device screen. On Android to see
the menu with the Manage Device option, swipe from the left side of the screen to right
on the main screen (with the Firebelly logo). On iOS click the 3 lines button in the upper
left corner of the main screen.
3. Click the
“Update Dev” button at the bottom right of the screen. The app will connect
with the Firebelly device
if it isn’t already.
4. Enter the software key given to you by your sales person or support in the box that pops
up.
5. The Firebelly App will download the new device software from the cloud (note that your
phone/tablet must have access to the internet for this step).
6. After retrieving the new device software from the cloud, the Firebelly App displays a
progress indicator that shows the device software update is in progress. Keep your
Firebelly device close to your phone/table during the update.
7. The Firebelly device will automatically restart once the download is complete and the
Firebelly App will reconnect with the device. While restarting, the device led will be
purple while it is loading the new software.
8. Once the device reconnects with the app, verify that the version number shown matches
the updated software version that you were expecting.
