Contact us for assistance:
| www.balkenehome.com
ASSEMBLY
2
Attach the
Lower Post
E
to the
Post Support Plate
F
using 4
M8x16 Bolts
and 4
M8 Washers
.
(Note: Turn the
post and support plate upside down to secure the bolts.)
Align the
Post Support Plate
with the holes in the
Lower Post
,
and insert 1
M8x16 Bolt
through 1
M8 Washer
and through the
aligned holes. Tighten with a wrench.
Hardware Used:
4x Bolt M8x16
4x Washer M8
3
Attach the
Post Support Plate
F
/Lower Pos
t
E
to
the
Tank Housing Assembly
G
/
H
.
(NOTE: Make sure
FireSense® logo is facing forward directly over the Tank
Housing Support Bar.)
Align the holes in the
Post Support
Plate
with the holes in the top of the
Tank Housing Assembly
and insert a total of 12
M4x10 Bolts
into the holes and loosely
tighten. Once all bolts have been inserted, tighten with a
wrench.
Hardware Used:
12x Bolt M4x10
4
Attach
Tank Housing Door
I
to the
Tank Housing
Assembly
G
by sliding the pins on the side of the door
into the hinges located on the right side of the
Tank Housing
Assembly
.
(NOTE: Make sure you hold door to the SIDE of the
Tank Housing Assembly before trying to align pins. If you hold
door to the FRONT of the Tank Housing Assembly, you will
NOT be able to align pins correctly.)
I
G
/
H
F
E
E
F
G
/
H
6