STARTING AND USE INSTRUCTIONS
TERMINATOR-1000
Rev. 000
20/12/04
18/35
4.5. INSTALLATION
Installation must be carried out by authorized personnel after reading this manual.
4.5.1 BATTERIES INSTALLATION
To install the batteries follow these instructions :
¾
Lift the recovery tank up in order to reach the batteries room (see detail 1 in picture 4.4);
¾
Install the batteries in their room (detail 2 picture 4.4.) and make sure that the cases of the batteries
are not broken;
¾
Never fill distilled water after having recharged the batteries.
¾
Clean the surfaces for the connections;
¾
The operator can easily lift the batteries up by means of handles.
4.5.2 BATTERY CHARGER INSTALLATION
Batteries must be recharged in a place equipped with a proper suction system of gases spread during this
operation. Otherwise, batteries must be charged in a ventilated and dry place far from heat sources and
corrosive substances.
Protect the electric network with a delayed switch or with a fuse whose capacity is higher than the battery
charger maximum input.
Control the battery outlet polarity.
PICTURE N° 4.4
Connect the battery charger to the machine socket
PICTURE N° 4.5
1
2
