- 6 -
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Devices connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
a coaxial cable, may in some circumstances create
a fire hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Electrical devices not in the hands of
children
Never let children use electrical devices unsupervised.
Children cannot always recognize properly any
possible danger. Batteries / accumulators can be life
threatening when swallowed. Store batteries out of
the reach of small children. In case of swallowing a
battery, medical aid has to be sought immediately.
Also keep the packaging away from children as there
is danger of suffocation.
The Standby button does not fully switch off this
product. Moreover, the device continues to consume
power in standby mode. In order to separate the
device completely from mains, the mains plug has to
be pulled from the mains socket. Because of that the
device should be set up in a way, that an unobstructed
access to the mains socket is guaranteed, so that
in case of emergency the mains plug can be pulled
immediately. During periods of prolonged non-use,
the TV should be disconnected from the mains power
supply.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Licence Notification (Optional)
Manufactured under license from Dolby
Laboratories.
Environmental Information
This television is designed to consume less energy
•
to save the environment.
You not only help to save the environment but you
can also save money by reducing electricity bills
thanks to the energy efficiency features of this TV.
To reduce energy consumption, you should take the
following steps:
You can use the Power Save Mode setting, located
•
in the
Other settings
menu. If you set the Power
Save Mode as On, the TV will switch to energy-
saving mode and the luminance level of the TV set
will be decreased to optimum level. Note that some
picture settings will be unavailable when the TV is
in Power Save Mode.
When the TV is not in use, please switch off or
•
disconnect the TV from the mains plug. This will
also reduce energy consumption.
Note that annually, using the TV set in Power Save
•
Mode has more power efficiency than disconnecting
the TV from the mains plug instead of keeping
stand-by mode. Therefore it is highly recommended
to activate Power Save Mode setting to reduce
your annual power consumption. And also it is
recommended to disconnect the TV from the mains
plug to save energy more when you do not use.
• Please help us to save environment by following
these steps.
Repair Information
Please refer all servicing to qualified personnel. Only
qualified personnel must repair the TV. Please contact
your local dealer, where you purchased this TV for
further information.
