Finisar WaveShaper A Series Скачать руководство пользователя страница 8

Страница: 8 / 47

The WaveShaper can be controlled using the web browser on a hand-held device such as a tablet or phone. However, performance

has been optimised for use with a mouse and keyboard and not all functions may operate correctly when used with a touchscreen

device.

2.4

Can't ﬁnd the WaveShaper?

If the WaveShaper connected to the network does not appear in the WaveShaper Connect window, then try these steps:

Ensure that the WaveShaper is connected to the LAN

before

powering-on the instrument. The network will only assign

an IP address to the WaveShaper if it is connected to the network before powering on. The default WaveShaper IP

address may cause some issues in some network conﬁgurations.
If the WaveShaper still does not appear, it could be due to changes made to the WaveShaper IP settings. The

WaveShaper IP setting can be reset to the default mode with the reset switch. The default mode is

"DHCP then Fixed

IP".

While the WaveShaper is running, press and hold the reset switch at the back of the instrument for at least

seconds

Let go of the reset switch and afterwards power cycle the WaveShaper.
The WaveShaper should then be discoverable in the WaveShaper Connect window.

For further detailed technical help, please visit the Finisar KnowledgeBase website.

If there are still connection issues, then please contact us by email: waveshaper@ﬁnisar.com

2.5

WaveShaper Mac Address

For both the Module and Benchtop, the MAC addresses of the USB and Ethernet interfaces are printed on the Serial Number

Label.

WaveShaper A Series User Manual

Содержание WaveShaper A Series
















































Результаты поиска

Содержание WaveShaper A Series

Отзывы:

Похожие инструкции для WaveShaper A Series

Бренды по названию

Популярные бренды

Finisar WaveShaper A Series, Руководство пользователя

Результаты поиска

Содержание WaveShaper A Series

Отзывы:

Похожие инструкции для WaveShaper A Series

Бренды по названию

Популярные бренды