Fine offset WH32M, Руководство пользователя

Страница: 14 / 24

Version 2.0 Page
14
4.5.2 Time Alarm Settings Mode
To enter the Alarm Mode, press and hold the
ALARM
key for two seconds (
ALARM
+ 2
seconds). To advance each command, press (do not hold) the
SET/CH
key.
Command Function Description Settings
ALARM +
2 seconds
Alarm
Hour Set the Alarm Hour Time Press
TEMP/+
or
BARO/-
to
increase or decrease the alarm hour.
SET/CH
Alarm
Minute Set the Alarm Hour Minute Press
TEMP/+
or
BARO/-
to
increase or decrease the alarm
minute.
SET/CH
ALARM
ON/OFF Turn the Time Alarm On or
Off. Press
TEMP/+
to toggle between
Time Alarm ON and Time Alarm Off
SET/CH
LOW
Alarm Turn the LOW Temperature
Alarm On or Off Press
TEMP/+
to toggle between
Time Alarm ON and Time Alarm Off
SET/CH
Exit Set Mode
Figure 10
4.5.3 Cancelling the Alarm
If the time alarm sounds, press the any key to silence the alarm. Press the
LIGHT/SNOOZE
key
to enter snooze mode.
The low temperature alert will reset automatically once the value has fallen into the low
temperature alert range.
4.5.4 Low Temperature Alarm
The low temperature alarm sounds when the outdoor is between -3 °C and +2 °C (26.6 °F and
35.6 °F). The LO temperature icon will appear and flash on the console. If the BEEP is
switched on, an audible alert will also activated when the low temperature alert occurs.
If you own more than one sensor, the low temperature alarm will activate for any one of the
sensors.
Figure 11