Filtertechnik
1 Central Park, Lenton Lane, Nottingham, NG7 2NR
Tel:
+44 (0)115 9003 600
Email:
Fax:
+44 (0)115 986 8875
Registered in England No: 03969985 VAT No: 760 821 731
Certification No. UK002838
Page 2 of 15
Typical Applications
Typical applications for the filtration unit include:
•
Filtering the fluid in a hydraulic reservoir periodically as a supplement to continuous filtration
by system filters.
•
Cleaning up your hydraulic system before restarting the system following component failure.
•
Providing clean fluid when re-filling and adding fluid to the system reservoir.
•
Reclaiming contaminated fluid.
•
Pre-filling and cleaning up hydraulic systems on new or re-built machinery and equipment.
•
Off-line contamination of hydraulic systems.
•
Emptying waste fluid quickly.
Health, Safety & Environmental Considerations
•
This equipment should only be used for its intended purpose by competent and authorised
persons, inappropriate use could cause serious injury or death.
•
Prolonged contact with oil can cause damage to the skin. Appropriate PPE (personal
protective equipment) should be worn when operating the unit e.g. protective gloves, safety
glasses, safety shoes etc. Always observe local health and safety requirements.
•
The unit should only be used on a flat, even surface and be attended at all times.
•
Do not operate switches with wet hands.
•
The unit must always be disconnected from the air supply before carrying out any routine
maintenance or repairs.
•
Air and fluid hoses should be checked for any signs of damage before starting the unit.
•
Ensure a spill kit is available in case of any accidental spills.
•
Used filters must be disposed of in accordance with local environmental requirements.
