Fillauer AllPro Foot, Руководство по эксплуатации продукта

Страница: 3 / 8

3
Installation
Attention: Deviating from the installation instructions or modifying the foot
in any way will void any product warranty and could lead to product failure
and injury to the patient.
Reversible Pyramid Insert (RPI)
The RPI is set at 35% of foot length,
except for AK models which are set at
30% of foot length. If the BK user would
benefit from more dynamic response,
the RPI adapter can be flipped 180°. See
instructions below for final assembly.
1. Walk patient in both positions to
determine the desired pyramid
position.
2.
Before final delivery of the
prosthesis, use the epoxy adhesive
provided or equivalent to secure
the pyramid assembly. Fabtech
sPLUSeries adhesives are
acceptable.
3. Apply adhesive to the exterior
faces of the RPI adapter and push
into desired position.
4. Apply adhesive to the bushing shaft and insert into hole of RPI adapter.
5. Apply adhesive to the top surface of RPI insert and bushing shaft. Then
install pyramid dome and ensure pin location lines up with the insert
pin hole.
6. Apply adhesive to the top of the bolt threads and insert bolt through
bushing.
7. Use 6 mm hex wrench to torque bolt to 30 N m.
8. Wipe away any excess adhesive with towel wetted with alcohol.
Pyramid
Dome
Pyramid
Insert
Bolt
Bushing
30% Position
(Increased
Dynamics)
Pyramid
Dome
Pyramid
Insert
Bolt
Bushing
35% Position
(Standard)