Concrete Spraying Machine
– SSB 02.1
5
Training Instructions
There are only mentally and physical competent workmen older than 18 years
with theoretical and practical skills qualified to operate the machine.
Other Ways of Use
The Machine cannot be used for any other purpose than transport of dry and wet
concrete mixes, fire-resistant mixes and similar materials. If used for any other
purpose, the manufacturer does not assume any liability for damages caused by or
to the Machine. It is not presumed that the equipment should be operated by any
unqualified operating staff and, therefore, the Operating and Maintenance
Instructions are compiled in a manner and to an extent inevitably necessary for a
safe operation of the Machine by a trained member of the staff.
IV. Description
The Machine comprises the following main parts:
-
the Machine drive (electromotor, gearbox, speed variator, if any)
-
basic frame
-
dosing drum (rotor) with wearing plates
-
the Machine head with upper sealing plate, lower sealing plate and exhauster,
-
feeder and vibrator,
-
rippling equipment,
-
tightening bolts,
-
exhauster with a filtration bag,
-
air distribution and manometers,
-
electrical installations,
-
central lubricating system,
-
bantam wheels (rail undercarriage, frame),
-
accessories (hoses, quick couplers, nozzle, sealing plates, etc.)
The Machine drive is executed by the slipping gear (speed variator, if any) and
electrical motor.
The bearing part of the dosing, the Machine drive and air distribution are situated
on the frame. The bantam wheels are screwed on the basic frame sides.
The dozing drum is fixed on the top part of the bearing part shaft by a square(end)
and tightening nut.
The Machine head is installed on the hinged frame. The sealing plate is mounted
on its bottom side and its bottom side rests on the dozing drum. The air intake is
installed on the Machine head upper side as well as the feeder and exhaust with
the filtration bag.
