Concrete Spraying Machine
– SSB 02.1
3
I. Preface
This user manual is necessary to get basic information about safety use of
concrete spraying machine SSB 02.1 (further only machine), made by producer
FILAMOS, s.r.o., Hate 546, 261 01 Pribram, Czech Republic. Other information,
recommendations and technical parameters are mentioned in the Operating and
maintenance instructions made by producer. The user manual is obligatory for all
users that use this machine.
II. Use
Shotcreting machine SSB 02.1 is designed for the processing of dry or wet
mixtures. It is appropriate to execute works of medium and large scope. It is used,
in particular, to reinforce surfaces of engineering structures and the construction
of water works, to reinforce the vaulting of tunnels and collectors in underground
engineering and to maintain concrete constructions.
The machine is designed for the operation in the places free of a danger from the
methane explosion (SNM-0) and other inflammable gasses as stated in CSN EN
1127-2.
The machine may be used in media with temperatures ranging from +5 to +40 °C.
III. Machine Operating
Start operating – opening and adjusting compressed air, then turning on the
electric motor.
Presence of the machine operator is not necessary unless during refilling of the
mixture and its application.
Finish operating – it is necessary to empty the feeding hopper and blow
compressed air distribution system by air. To switch off the electric motor
thereafter and close the compressed air cock.
Workmen have to be introduced with:
-
User manual
-
Operating and maintenance instructions
-
Operating rules applied to the construction place
Workmen are obliged to use personal protective equipment stated in Operating
and maintenance instructions (crash helmet, ocular protection and respirator
against cement dust, convenient work clothes and shoes, work gloves). Workmen
are obliged to do daily notes into the operating diary.
