PAGE / 4
Doc. P/N 8.8517.00.6
Rev. December, 2019
1.
IDENTIFICATION
1.1.
General
The Fike Explosion Pressure Detectors are designed to continuously measure the pressures inside the protected
hazards. The extremely fast response time of the Ceramic pressure detector allows the Explosion Protection
Controller (EPC) to take more than one million samples every second. Using the same instantaneous speed, this
information is then processed to determine if the pressure change is that of a developing explosion.
The pressure detector utilizes a ceramic pressure sensing element. This ceramic element allows the detector to have
high overload protection, corrosion resistance and long-term stability. With ASIC technology, the detector is provided
with high accuracy through compensation of linearity and temperature errors.
1.2.
Nameplate Information
1.2.1.
Cerex (D) – Explosion Protection Ceramic Pressure Detector ‘Dust’
1.2.1.1.
P/N 2994502301-C-S (FDA approved)
The marking of the detector is laser printed on the side of the detector housing.
The 2994502301-C-S label looks as follows:
Содержание 2994502201-C-S
Страница 18: ......
Страница 19: ...Notes ...
