Fife MAXCESS SE-42, Руководство по эксплуатации

Страница: 7 / 18

SAFETY INSTRUCTIONS 2 - 3
SE-42R / SE-42
Infrared light sensor
www.maxcess.eu MI 1024 1 C
Si
cherhei
t.fm
∙ The parameters specified in Section
Technical data
must be
observed.
∙ Only accessory and replacement parts that have been
approved by Fife-Tidland GmbH may be used.
∙ No changes must be made to the sensor.
∙ Electrical lines must not be subjected to any mechanical
loads
Operation
∙ Danger of injury by crushing
Ö
Do not place your hands on or near moving parts (rollers,
material web, etc.) during operation.
∙ Danger of injury due to cutting on the edge of the material
web
Ö
Do not place your hands on the edge of the (moving)
material web during operation.
Maintenance
∙ Danger of injury by crushing
Ö
Maintenance work must only be performed on the sensor
when the power is turned off and the machine is stopped and
protected against being turned on again.