7
PROBE
TEMP
- - -
°F
ZONE 1
400
°F
PROBE
SETPOINT
- - -
°F
ZONE 2
400
°F
WELL DONE
MEDIUM
M. RARE
RARE
PREHEAT
Reading...
SET PREHEAT FUNCTION
Press once to preheat grill to 400°F.
Both zones 1 & 2 begin automatic preheat to system
default of 400°F. Once 400°F is reached, an alert will
beep once. If there has been no function selected
when 400°F has been reached, an audible alert will
beep for 5 seconds per minute for 5 minutes. If no
other function is selected, grill will remain at 400°F until
further action is taken.
When activated, a box highlights the function on
the control panel display.
SET ZONE 1 TEMPERATURE
Press once and Zone 1 is automatically selected
and a box appears around
Press to adjust the temperature setting for
Zone 1.
Adjust temperature by increments of 5°F until desired
temperature is reached for Zone 1 (left side). If arrows
are not pressed for 5 seconds, system begins operation
to achieve temperature setting. When zone is
activated, a box highlights the function on the
control panel display, as well as the zones being
controlled.
NOTE: When “Zone Cooking”, upper divider must be
securely in place prior to use, and lid must be fully
closed. Failure to follow these steps will result in
undesired cooking results. Please refer to “grill
assembly” found in your instructions for “OUTDOOR
GAS BARBECUE/GRILL ASSEMBLY MANUAL/USE
& CARE”.
GRILL TEMP
MODE
PROBE
TEMP
- - -
°F
ZONE 1
- - -
°F
PROBE
SETPOINT
- - -
°F
ZONE 2
- - -
°F
WELL DONE
MEDIUM
M. RARE
RARE
Reading...
ZONE COOKING
Dual Zone Cooking with automatic temperature control allows individual settings for Zone 1, Zone 2
or Dual, cycling through each with each press of
GRILL TEMP
MODE
PROBE
TEMP
- - -
°F
ZONE 1
225
°F
PROBE
SETPOINT
- - -
°F
ZONE 2
- - -
°F
WELL DONE
MEDIUM
M. RARE
RARE
Reading...
ZONE 1
SET PREHEAT