Fiery ZX-40, Руководство по печати

Страница: 38 / 81

4
4-1 Printing variable data documents
This chapter describes some of the special features supported by the Fiery ZX
including printing:
• Variable data documents using Fiery ZX FreeForm ™
• Simulations
• Booklets using the Fiery Booklet Maker XTension for QuarkXPress
• Duplex pages
For general instructions on how to specify print option settings, see Chapters 1 and 2.
Printing variable data documents
FreeForm allows you to create and print variable data documents using any application
you wish. FreeForm functions are set with two options when you print to the
Fiery ZX: Create Master and Use Master. The master and variable elements of the
document can be created using different applications, or even different computer
platforms.
N
OTE
:
FreeForm requires the ability to specify print option settings on a job-by-job
basis and is therefore not supported with UNIX printing.
T
O PRINT VARIABLE DATA DOCUMENTS
:
1. Create a master document that contains the non-variable elements of the document.
Page layout applications support master pages that can be edited separately from body
pages. If you wish, you can use the application’s master pages for the master document
elements, but it is not necessary.
The master document can comprise multiple pages.
2. Print the master document to the Fiery ZX with the Create Master print option set to
one of the FreeForm Master bin numbers (1 through 15).
Chapter 4:
Special Features