1
1-12
Printing from Windows Computers
Printing to the parallel port
The Fiery ZX has a parallel port that enables you to print most files directly from a
Windows computer if your network administrator has connected the Windows
computer’s parallel port to the Fiery ZX parallel port.
N
OTE
:
You cannot use the Fiery Downloader through the parallel port.
T
O
FILES
TO
THE
PARALLEL
PORT
:
1.
Make sure the parallel port is enabled on your Fiery ZX.
Check with your site administrator or operator to see whether printing to the parallel
port is enabled. See Getting Started for information on setting up parallel port printing
on your Windows computer.
2.
Select the printer port that is connected to the Fiery ZX parallel port.
Select one of the local ports:
LPT1, LPT2,
or
LPT3
. For instructions, see your Windows
documentation.
3.
Print from within your application.
If you are printing a PostScript file in binary format (not ASCII), verify that the
Network Setup option Ignore EOF Character is set to Yes. Check with your site
administrator for this information.
Saving files to print at a remote location
If you do not have a Fiery ZX and are preparing files to take to a service bureau or
other location, print your final files to the File port (as opposed to one of the local
ports). You can also print to the File port to create a file to be downloaded using the
Fiery Downloader. For instructions, see your Windows documentation.
Содержание ZX-40
Страница 1: ...P r i n t i n g G u i d e F IER Y ZX 40 ...
