manualshive.com logo in svg

Fiery ZX-40, Руководство по печати, Страница: 18 / 81

Поделиться
Скачать
Fiery ZX-40 Скачать руководство пользователя страница 18

1

1-6

Printing from Windows Computers

T

O

 

SAVE

 

PRINT

 

OPTION

 

SETTINGS

:

1.

After specifying settings for print options in the Fiery Options tab, click Save 
Settings.

2.

Name the settings file and browse to a location on your hard disk where you want to 
save the file.

3.

Click OK.

The settings file is saved to the location you specified.

T

O

 

LOAD

 

PRINT

 

OPTION

 

SETTINGS

:

1.

From the Fiery Options tab, click Load Settings.

2.

Browse to the settings file.

3.

Select the settings file from the list and click OK.

The print option settings in the Fiery Options tab are automatically configured with 
the saved settings.

Setting options and printing from Windows 3.1x

To print from Windows 3.1x, use the Adobe PostScript Printer Driver version 3.0.1. 
The driver is included with the Fiery ZX user software, and uses all features of the 
Fiery ZX. 

Once you have installed the Adobe PostScript printer driver and Fiery ZX PostScript 
Printer Description file (PPD), you can specify print settings. You can also change 
some of these settings for a particular job from within your application when you send 
it to the Fiery ZX. Before printing, make sure that the correct print options are set.

Содержание ZX-40


















































































Отзывы:

Нет отзывов