2
2-28
Introduction to Command WorkStation and Command WorkStation LE
2.
Specify the desired preference settings, and click OK to save your settings.
The following preferences can be specified:
Enable Animation
—Enables the display of animated graphics in the Selected Server
view of the Activity Monitor (see
Autologin
—Instructs Command WorkStation to remember the last access level and
password used to log in to each Fiery X3e. When you log in to the Fiery X3e again,
Command WorkStation automatically populates the Login dialog box with the
previous access level and password.
Enable ToolTips
—Enables the display of ToolTips, or context-sensitive text which
appears when you move the mouse pointer over particular buttons and options in
Command WorkStation.
Temporary path
—Specifies the folder where Command WorkStation temporarily stores
copies of the jobs you edit or change. Change the temporary path by clicking Browse
and specifying a folder.
Imposition: Units
—Specifies the units of measurement used to display attributes, such
as page sizes and custom sizes, in the Job Properties dialog box and Imposition
window.
Imposition: Template Path
—Specifies the folder where template files for imposition are
stored for later use. To change the template path, click Browse and specify a folder.
Search: Template Paths
—Specifies the folder where Find/Search templates are stored
for later use. To change the template path, click Browse and specify a folder.
