3
3-29
Tips for experts—UNIX workstations
Important note about the remote printer name
Whichever UNIX system you use, the name used for remote printer (or
rp
in the
/etc/printcap
file) in configuring the Fiery SI includes a hard-coded internal name that
the Fiery SI requires. It is not a user-selectable name. Do not enter it elsewhere unless
instructed to do so. This is not the same as the published name or host name.
The remote printer or
rp
name is a composite name that includes a device name or
number code. The code for your device is listed in the UNIX section of the User Guide.
For future use, enter it here:
The remote printer or
rp
name is:
queue_devicename
queue
—must be print or hold.
devicename
—the required name or number code for the copier/printer model. This
name can be found in the section on editing NET_WSCK.INI in Getting Started.
The remote printer or
rp
name is also used:
• When setting up your Windows NT Workstation or server to connect to the
Fiery SI over TCP/IP
Enter the remote printer name when you set up your Windows NT printer, as the
“Name of printer on that (lpr host) machine” in the Add LPR compatible printer
dialog box (see Getting Started).
The device name for your copier/printer model is also used:
• When editing the NET_WSCK.INI file for Windows NT workstations on TCP/IP
networks (see page 3-26 of this manual).