3
3-13
Overview of IPX printing to the Fiery SI
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, make sure you perform Network
Setup on the Fiery SI Control Panel, and that the settings reflect the entities you
created in NetWare Print Console. For settings you should use, see page 2-13 and
subsequent pages.
N
OTE
:
For printing to the Fiery SI, connect all Windows clients to a Novell NetWare
server and permit them to connect to the server or servers on which you defined a
Fiery SI queue.
After the server has been set up, client setup consists of:
• Installing the networking protocol, binding it to the Ethernet adapter card, and per-
mitting the client to log in to the NetWare file server.
On Windows 95 Workstations, both the IPX/SPX-compatible Protocol and the Cli-
ent for NetWare Networks should be loaded from the Network Control Panel. On
Windows 3.1 and Windows 3.11 workstations, the NetWare shell should be
installed.
• Setting up the Fiery SI as a PostScript printer by installing a PostScript printer driver
and the Fiery SI PPD (PostScript printer description)
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery SI
Under Windows 95, you select Printer Settings, select the printer, choose Properties,
and click Add Port in the Details tab. Browse the network for the list of NetWare
servers, and choose the Fiery SI queue on the server you assigned to it.
• Installing other optional client software, such as Adobe Photoshop separation tables
and Color Reference files. Optional software for your printing device and network
configuration is described in Getting Started.
Getting Started describes the last three setups for various kinds of Windows clients.
