2
2-15
Network Setup options
.
Once you have chosen a file server, the Fiery SI immediately tries to log in as guest
without a password. If it succeeds, it skips to the
NetWare Print Server
option.
If you try to add a file server but all Fiery SI connections are already being used, you
are prompted to remove a file server (see “Remove File Server” on page 2-18).
File Server Login
administrator/supervisor/Enter Login Name [supervisor]
This option appears only if a password is required for login. Choose
Enter Login Name
to enter your own login name and password or to log in as a
guest
. Choose
administra-
tor
or
supervisor
if you have those privileges.
Network Setup
Ethernet Setup
IPX (Novell) Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search Name
You may select the file server from a scrollable list, or by a name search. Choose
From List
if your network doesn’t have a large number of file servers. Select
Search
Name
if the number of file servers is so large that scrolling through the list would take
a long time.
If you selected
From List
:
If you selected
Search Name
:
Add Server
[list of all servers]
The Fiery SI obtains a list of NetWare file
servers by querying the IPX network. Use
the up and down arrows to select a
NetWare file server from the list. Choose
the server on which you have configured
a print server and print queue to handle
Fiery SI print jobs.
Enter First Letters of Server Name
Use the up and down arrows to enter the
first letters of the name of the file server
you want to use, and choose OK.
Add Server
[list of servers matching the search]
This option is displayed if you entered
letters to search. Scroll to select the server
you want from the list.