manualshive.com logo in svg

Fiery Fiery EX2101, Руководство по управлению заданиями

Поделиться
Скачать
Fiery Fiery EX2101 Скачать руководство пользователя страница 52

2

2-26

Introduction to Command WorkStation and Command WorkStation LE

4.

In the Select Pages area, specify the pages you want to print.

Each set of pages contains specific information about the Fiery EX2101.

You can print the following pages from the Fiery EX2101:

PS Test Page/PCL Test Page

—Allows you to confirm that the Fiery EX2101 is properly 

connected to the copier, and provides grayscale samples to troubleshoot problems with 
the copier or the Fiery EX2101. The following settings are among those listed on the 
Test Page: Server Name, Printer Model, date and time the Test Page was printed.

Configuration

—Provides the current Fiery EX2101 and copier configuration. This 

page lists general information about the hardware and software configuration of the 
Fiery EX2101, current settings for all Setup options, and the network addresses of the 
Fiery EX2101.

Job Log

—Lists a log of the last 55 jobs processed or printed. For information on the 

fields in the Job Log and printing it in other forms, see 

“Using the Job Log”

 on 

page 3-32.

PS Font List

—Lists all PostScript fonts currently resident on the Fiery EX2101 hard 

disk drive.

PCL Font List

—Lists all PCL fonts currently resident on the Fiery EX2101 hard disk.

E-mail Log

—Lists a log of the last 55 E-mail printing status reports, information that 

can be useful to the network administrator. The reports cover printing or scanning via 
the E-mail printing feature, monitoring the address book, and overall transmissions. 
Before you can print the E-mail Log, you must enable the E-mail printing feature 
in Setup. For details, see the

 Configuration Guide

.

When you select the Local Printer option in Command WorkStation, you can print 
the following pages:

Archive Log

—Lists all jobs displayed in the Archive panel.

Queues

—Lists all jobs displayed in the Active Jobs window.

5.

Click Print.

Fiery EX2101 information pages printed with the Print Pages command appear in the 
Fiery EX2101 Job Log with the user name Operator, even if you logged in as 
Administrator.

Содержание Fiery EX2101























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды