Fiery E-750, Руководство по настройке, Страница: 44 / 184

2
2-20 Setting up Network Servers
The server should respond with a message such as
Reply from <IP address> ...
Some systems will respond with a continuous display of output from the IP address.
To stop the output, type
Control-C. You can use the ping command at any time.
T
O PRINT TO THE
E-750
• On a UNIX system running SunOS 4.x or other BSD-based variant, use the lpr command
to send a job to the E-750.
• On a UNIX system running Solaris 2.x or any System V implementation of UNIX, use
the lp command to send a job to the E-750.
• Windows NT 4.0/2000/XP/Server 2003 users with the TCP/IP protocol loaded can send
print jobs to the E-750 from their applications or from a command prompt.
When Windows NT 4.0/2000/XP/Server 2003 users print from applications, they can
set print options with the driver but not from the UNIX command line.