Fiery E-750, Руководство по настройке, Страница: 157 / 184

7
7-5 Clearing the E-750
T
O SET OR CHANGE A PASSWORD
1. Select the password you want to change.
2. Type the password in both the Enter New Password and Verify New Password fields.
Passwords are case-sensitive and can be any combination of letters and numbers up to
19 characters. You must enter the password
exactly the same way both times. The new
password remains in effect until you change it.
T
O REMOVE A PASSWORD
1. Select the password you want to delete.
2. Delete the asterisks (*) in both the Enter New Password and Verify New Password
fields.
If you forget the Administrator password, contact your authorized service
representative to reinstall E-750 system software. This clears the Administrator
password and allows you to set a new one.
Clearing the E-750
The Clear Server command allows you to clear all queued print jobs from the E-750—
jobs in the E-750 Print, Hold, and Printed queues. Jobs can also be deleted, either
individually or as a group, using the job management tools. Clear Server also clears all
jobs archived on the E-750 hard disk, the index of archived jobs, and finally, all Fiery
FreeForm masters and the index of Fiery FreeForm masters.
To clear the E-750, scroll through the Server menu and choose Clear Server. You are
asked to confirm your selection. If the Administrator password has been set, you are
prompted to enter it.