Fiery E-41, Инструкция по установке и обслуживанию

Страница: 43 / 161

U
SING THE
E-41 43
T
O SHUT DOWN
,
RESTART
,
OR REBOOT THE
E-41
FROM THE
E-41 C
ONTROL
P
ANEL
1. Make sure that the following logo screen is displayed on the E-41 Control Panel.
If the system has just finished processing, wait at least five seconds before beginning the
shutdown procedure.
N
OTE
:
Notify the network administrator before you remove the E-41 from the network.
2. Press the Menu button once to display the Functions menu.
3. Make a selection:
• To restart or reboot the E-41, select Restart Server. A submenu displays, allowing you to
select Restart Server, Reboot System, or Cancel.
• To shut down the E-41 immediately, select Shut Down System.
N
OTE
: Use the reset button on the front of the E-41 only if the system is unresponsive to
keyboard or mouse actions.
Allow the system to shut down and power off or restart.
If you selected Restart Server, you may need to wait 1 minute or more for the server software
to restart.
Before accessing internal components, make sure that all cables are disconnected from the
back of the E-41.
This logo screen indicates that the E-41 is Idle.
Server name
Menu button
Eject CD/DVD
IP Address
Restart Server
Shut Down System
Server name
Restart Server
Reboot System
Cancel
Server Name
Immediately
shuts down the E-41.
Displays a submenu.