Fiery DocuColor 3535, Руководство по настройке

Страница: 50 / 116

3
3-8 Preparing for Fiery Setup
Network server setup requirements
For Novell and Windows NT 4.0/2000 (using TCP/IP) networks, you must configure
the network servers for printing to the Fiery before you configure Fiery network settings
in Setup. For chapter references to information about network server Setup, see the
diagrams in
Chapter 1 .
To configure network settings in Setup, you must have a live network connection, so
the Fiery can query the network for zones, servers, and server-based queues.
Whenever the configuration of the Fiery, the copier, or the network changes at your
site, you can alter individual settings to correspond to the changed environment.
Changing network or port settings may require that you make changes to other Setup
options, as well.
N
OTE
:
You must configure the Fiery with the correct Windows NT/2000
domain name. This is especially important for Windows printing, also known as
SMB printing.
N
OTE
:
The Fiery does not support the Windows 2000 Active Directory Service. When
you use the Fiery in a Windows 2000 server environment, assign the Fiery to a
Domain or Workgroup.