Fiery DocuColor 3535, Руководство по настройке

Страница: 39 / 116

2
2-15 Fiery on a network with UNIX workstations
Tips for experts—UNIX workstations
Setting up the Fiery in a UNIX environment has the same requirements as setting up
any printer or new device:
• A distinct IP address is required for the Fiery as well as for each workstation on
the network.
• A name must be selected for the Fiery that goes with the IP address.
• The IP address of the Fiery must be registered for the network in a host database, and
also on the Fiery itself.
• At least one print connection (Print or Hold) must be published.
The following information applies especially to the Fiery:
• The Fiery is a printer controller that understands lpd protocols.
• The Fiery has a remote printer name you must use in order to communicate with
it successfully.
For details, see the following section.
Important note about the remote printer name
Whichever UNIX system you use, the name used for the remote printer (or rp in the
/etc/printcap
file) in configuring the Fiery must be one of the following
:
print
hold
direct
The remote printer name is also used when setting up your Windows NT 4.0/2000
Server or Windows NT 4.0/2000/XP Workstation to connect to the Fiery over
TCP/IP. Type the remote printer name when you set up your Windows NT 4.0/2000
printer, as the “Name of printer or print queue on that (lpd host) server” in the Add
LPR Compatible Printer dialog box.
For the Windows 2000/XP printer driver, type the remote printer name for Queue
Name under LPR Settings in the Configure Standard TCP/IP Port Monitor
dialog box.