Fiery DocuColor 3535, Руководство по настройке, Страница: 36 / 116

2
2-12 Setting up Network Servers
Setting the NetWare 4.x bindery context
You can connect only one directory tree to the Fiery. If you need to connect additional
NetWare 4.x servers, you can do so by using bindery emulation. You can connect up to
eight bindery servers to the Fiery.
N
OTE
:
The file server you select must not be in the same tree as the one you selected in
NDS Setup.
In order to set up the NetWare 4.x server in bindery emulation mode for printing to
the Fiery, the network administrator must do the following:
• Determine the Directory Services path to the container in which the print server and
the print queue for the Fiery will be created.
The container defines the “bindery context” for your network structure.
• Edit the network startup file to set the bindery context.
• Activate the new bindery context.
Setting up a NetWare print queue for bindery
For NetWare 4.x in emulation mode, the NetWare print server and print queue for
the Fiery are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in the NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell server, and then you
can select them in Network Setup.
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup, and verify
that the settings reflect the entities you created in the NetWare administrator utilities
(see
page 2-9 ).
N
OTE
:
For printing to the Fiery, connect all Windows clients to a NetWare server and
permit them to connect to the Netware print server or servers on which you defined a
NetWare print queue for the Fiery.