Fiery DocuColor 3535, Руководство по настройке, Страница: 31 / 116

2
2-7 Fiery on a NetWare network
Many of the prerequisites for setting up printing through a Windows NT 4.0/2000
server also apply to setting up Windows printing where a server is not present. The
prerequisites are summarized in the following list. More details are available in your
Microsoft documentation.
• Print a Configuration page (see page 7-7 ).
Use the information on this page to determine the current Fiery settings.
• Load the TCP/IP network protocol on the computer (for Windows 9x/Me, load File and
printer sharing for Microsoft Network. For Windows 2000/XP load Client for Microsoft
Networks).
• Verify the Workgroup name of the computer in the Windows Network control panel.
Make sure the Workgroup name is the same as the one listed in Fiery Setup.
• For Windows 9x/Me, in the File and printer sharing for Microsoft Network Properties
dialog box, specify Automatic or Enabled for Browse Master, and select Yes for
LM Announce.
• For Windows 2000/XP, in the Client for Microsoft Networks Properties dialog box,
configure the computer to allow file sharing, and then restart the computer.
• Ping the Fiery to verify TCP/IP communication is successful (see page 2-17 ).
Fiery on a NetWare network
The NetWise ™ features built into the Fiery support the following network operating
environments:
• NetWare 4.x or 5.x—NDS (Novell Directory Services)
• NetWare 6.x—NDPS (Novell Distributed Print Services)
• Servers running NetWare 4.x or 5.x in bindery emulation mode
For Ethernet-based networks, the IPX/SPX protocol is supported.
N
OTE
:
Setting up a NetWare environment correctly requires the presence and active
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.