Fiery DocuColor 3535, Руководство по настройке

Страница: 105 / 116

7
7-9 Shutting down and restarting the Fiery
Shutting down and restarting the Fiery
Generally, you can leave the Fiery and the copier running all the time. This section
describes how to shut down and restart the Fiery when necessary.
Shutting down and restarting the Fiery
You may need to shut down the Fiery for service, or restart the entire Fiery system.
When you do so, fonts that have been downloaded to the hard disk are not deleted.
Print jobs in the Hold queue, the Printed queue, and jobs that have been processed but
not printed are not deleted; they will be available for printing when you restart
the Fiery.
T
O SHUT DOWN THE
F
IERY
• Make sure the copier is not in use, and turn off the copier using the main power
switch on the front.
The copier Touch Screen displays a message stating that the copier is shutting down.
Wait approximately 30 seconds for the copier to turn off completely.
Restarting the Fiery
Restarting the Fiery resets the Fiery system software, but does not restart the entire
system. Network access to the Fiery is temporarily interrupted and all currently
processing jobs are aborted.
T
O RESTART THE
F
IERY
• Turn off and then turn on the copier using the main power switch on the front.
The copier Touch Screen displays a message stating that the copier is shutting down.
Before restarting, wait approximately 30 seconds for the copier to turn off completely.