Assembly Instructions for Dorchester Table Range
(2020 Design)
Parts Included
Item
Quantity
Tabletop
1
Legs (delivered interlocked)
1
Screws
4-8
Metal Parasol Ring and Cover
1
If you discover any of the stated parts are missing or damaged, please contact Field & Hawken
customer support immediately for it to be rectified and replacements provided if required.
Tools Required
Screwdriver
1
Recommended Persons for Assembly
It is recommended that at least 2 people assemble this table.
Assembly Instructions
1.
Slot the 2 leg pieces into each other to form a cross (as shown in picture C). The legs will
have small numbered sticker on them (E.g. A1, A2, A3 etc.) and these are used to align to the
tabletop.
2.
Locate the numbered stickers on the base of the tabletop and ensure that the tabletop is
positioned so that the location of the numbered holes in the tabletop match to the same
numbers on the legs. This will ensure the best fit of hole to table leg
‘
lug
’
. Please note that
some versions of the table do not have the lug connection. This is not an error, just a
variation in design and will not affect the construction or use of the table
3.
Fix the tabletop and legs in place using the screws provided. There should be small pre-
drilled pilot holes to help locate the screw and aid fixing.
It is advised to do this with either someone applying pressure to the top of the table whilst it
is being screwed, or by placing the table upside down on some protective padding and
screwing the legs into the tabletop before turning it back to the right way up. You want to
achieve a flush fixing of the tabletop and legs.
4.
Place the metal parasol ring and cover in the centre hole of the table.
5.
Enjoy
Should you have any questions or concerns then please contact us and we will be happy to arrange
for a member of our warehouse team contact you.
Phone: 0118 942 2248, Email: [email protected]
Thank you for your purchase.
