background image

www.fieldcontrols.com

Please retain these instructions after installation.

This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of a 
qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and 
is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions 
required, and has complied with all the requirements of the authority having jurisdiction.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By:

Phone:

HEALTHY HOME SYSTEM

CONTROL Plus

Model: HHSC+

The Field Controls Healthy Home System™ Controller Plus (HHSC+) is designed to work in conjunction with 
the forced air HVAC system to periodically introduce fresh air into the home by controlling an FAD Fresh Air 
Damper installed in a fresh air duct connected to the HVAC return plenum, and circulate it throughout the 
home effectively and efficiently, and enables the HVAC system to meet ASHRAE 62.2 and other ventilation 
codes and standards..  The HHSC+ is designed to operate continuously year round without user intervention.  
The HHSC+ is initially programed by the installer and operates interactively with the HVAC system thermostat.  
Certain features are readily accessible by the occupants for customization of the system, to meet their individual 
preferences.

ITEMS INCLUDED IN KIT:

1-HHSC+ Ventilation and Fan Cycling Control
1-Four-wire connector harness for FAD Fresh Air Damper (FAD not included)
1-Installation Hardware
1-Instruction Booklet

Содержание HHSC+





















Отзывы: