background image

www.fi eldcontrols.com

Please retain these instructions after installation.

This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition 

This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition 
of a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged 

of a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged 
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 

in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 
precautions required, and has complied with all the requirements of the authority having jurisdiction.

precautions required, and has complied with all the requirements of the authority having jurisdiction.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By:

Phone:

UV-AIRE AIR PURIFYING SYSTEM

Model: CUV AND DUV SERIES

ITEMS INCLUDED IN SYSTEM:

• 

Magnetic Mount Power Enclosure

• 

Lamp Support Rod(s)

• 

Ultraviolet Lamp(s)

• 

Access Panel Warning Label

• 

Instruction Manual

• 

Tie Wraps

• 

Lamp Install Label

• 

Lamp Cleaning Kit

P/N 780108800 Rev A 10/22

The UV‐Aire unit is designed to emit High Output UVC Wavelength light rays which inactivate and sterilize 
airborne microorganisms as they pass through a HVAC system or ductwork. The UV-Aire Purifying System  
models have been designed for use as coil irradiation and/or for air disinfection.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or 
condition, nor for use in the mitigation, treatment or prevention of any disease or condition.

The aspects associated with the use of this product and its ability to aid in disinfection of environmental air 
have not been investigated by UL.

AIR DUCT MOUNTED ACCESSORY

WITH RESPECT TO ELECTRICAL SHOCK, 

FIRE AND CASUALTY HAZARDS ONLY

E524561

Содержание CUV Series





















Отзывы: