FIEDLER H40 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 44

FIEDLER H40 Скачать руководство пользователя страница 43

Hydro Logger H40

User manual

FIEDLER

electronics for ecology

43

Warranty Card

Type : H40 _______________ Date of delivery to customer : ________________

Serial number :

________________ Date of commissioning : ________________

.................................................................

Manufacturer / Supplier - signature

The product was tested and set up correctly before being shipped from the company. Nevertheless, it may happen
that during operation, defects may appear on the device that are undetectable when the product is tested by the ma-
nufacturer.
If any defect is caused by faulty material, workmanship or software, the product will be repaired or replaced free of
charge if the claim is made within the warranty period, which is :

two years from the date of entry into service, but no longer than two and a half years from the date of sale.

If the manufacturer is unable to repair or replace the product within the warranty period, it may provide a refund of
the purchase price upon return of the product.
The manufacturer is not liable for defects caused by interference with the design of the device, damage to the device
or improper connection. When installing and operating the device, it is necessary to observe all the instructions in
th

e Technical Specifications, the related ČSN and safety rules.

All repairs during the warranty period are the sole responsibility of the manufacturer. For hygiene reasons, only clean
and properly packaged products should be sent for repair.

Assurance of conformity

within the meaning of Act No.22/1997 Coll., on technical requirements for products

Manufacturer :

FIEDLER AMS s. r. o.

represented by Ing. Jindřich Fiedler

Lipová 1789/9, 370 05 České Budějovice, Czech Republic

ID 03155501, Tel/Fax:. +420 386 358 274, E-mail: [email protected]

Pursuant to

§

13 paragraph (5) of Act No.22/1997 Coll., on Technical Requirements for

Products, we assure the distributor/customer that we have issued a "Declaration of Con-
formity" for the products manufactured/imported by us, which are covered by the afore-
mentioned Act and the relevant government regulations.

In České Budějovice on 17. 01. 2015

Ing. Jindřich Fiedler

Managing Director

«
...
41
42
43
44
»

Содержание H40













































Отзывы:

Нет отзывов